FLUSH TYPE FITTING

 
  • Manufactured from mild steel
  • Uniformly case hardened 0.005" - 0.009"
  • Yellow zinc plated for maximum resistance to corrosion
  • Used in all application where protruding fittings cannot be used-in moving parts such as revolving bearings or line shaft pulleys
  • Not easily damaged as these do not project outwards
  • Case hardening to be removed in system.
picture picture picture  
min 83
ROCKWELL 15N		 with
BALL CHECK		 >75 hrs
to RED RUST		  


Art.Nr Thread Type Overall Length Shank Length Effective Thread Length Drill Dia
mm mm mm Inch
502A No.10-32 UNF Straight 8.73 5.95 - -
TV448A No.10-32 UNF Straight 8.73 6.2 - -
DF885B Drive Fitting Straight 7.14 5.89 6.46 1/4
DF1885 Drive Fitting Straight 7.14 5.89 6.52 1/4
FT851 1/4"-28 UNF Straight 10.3 7.5 - -
FT814 - Straight 8.3 7.1 8.16 5/16
FT815 1/8"-27 NPTF Straight 9.1 7.5 - -
FT452 1/8"-27 NPTF Straight 13.5 - - -
FT741 1/4"-18 NPT Straight 14.1 - - -



Flush Type Fitting 502A Flush Type Fitting TV448A Flush Type Fitting DF885B Flush Type Fitting DF18851
NO:10-32 UNF THREAD NO:10-32 UNF THREAD DRIVE FITING DRILL DIA 1/4" DRIVE FITING DRILL DIA 1/4"

 

Flush Type Fitting FT851 Flush Type Fitting FT814 Flush Type Fitting FT815 Flush Type Fitting FT452
1/4"-28 UNF THREAD FOR 5/16" DRILL 1/8"-27 NPTF THREAD 1/8"-27 NPTF THREAD"

 

Picture
1/4"-18 NPT THREAD



ILLUSTRATIONS-ACTUAL SIZE